
Spigen tempered glass
- 2 pack
- 0.33mm
- Fitting frame
iPhone 13 owners have one job to get right: buy a protector cut for this exact model, not for the family. The cutouts, the sensor housing and the curve of the glass all change between siblings in the same range, and a protector that is 2mm out will lift at a corner within a fortnight.




Listing states it does not fit iPhone 14 Pro, iPhone 14 Pro Max, 13 Pro


![Mothca Matte Glass Screen Protector for iPhone 17e / iPhone 16e / iPhone 14 / iPhone 13 / iPhone 13 Pro [6.1 Inch] Anti-Glare & Anti-Fingerprint Tempered Glass [Easy Installation Frame] Smooth as Silk](https://m.media-amazon.com/images/I/41+bwRtmjXL._SL500_.jpg)
![iCarez HD Anti Glare Matte Screen Protector for iPhone 17e / iPhone 16e / iPhone 14 / iPhone 13 /iPhone 13 Pro 6.1-Inches [3 Pack] (Case Friendly) Premium No Bubble Easy to Apply with Hinge Installation](https://m.media-amazon.com/images/I/41-1u6KCKhL._SL500_.jpg)










Pulled from each listing and lined up on the points that decide it. "Not stated" means the seller does not say, which is not the same as no.
| Specification | Spigentempered glass | PEHAELprivacy | TOCOLmatte / anti-glare | NEW'Ctempered glass | TZGZTmatte / anti-glare | Wiaocittempered glass |
|---|---|---|---|---|---|---|
| In the pack | 2 | 2 | 2 | 3 | 3 | 6 |
| Thickness | 0.33mm | Not stated | 0.33mm | 0.33mm | Not stated | 0.33mm |
| Fitting frame | Included | Not stated | Included | Not stated | Not stated | Included |
| Case-friendly | Yes | Not stated | Not stated | Yes | Yes | Yes |
| Full coverage | Not stated | Yes | Not stated | Not stated | Yes | Not stated |
| Lens protectors | Not stated | Not stated | Not stated | Not stated | Included | Included |
| View | View | View | View | View | View |
For the iPhone 13 the sensible shortlist is tempered glass. Below are the options currently sold into the UK, grouped so you can see the difference between a £6 three-pack and a £30 single protector before you commit.
The cutout must clear the sensor housing. A protector that overlaps it can slow or break face unlock, so avoid trimmed-down universal sheets.
The iPhone 13 has a 6.1-inch display. That figure is the diagonal measurement, so it doesn't on its own tell you a protector will fit, two devices with the same diagonal can have different corner radii and cutouts. Always buy one listed for the iPhone 13 by name.
Tempered glass is the default choice for the iPhone 13. The default choice. Rigid, glass-clear, absorbs impact by sacrificing itself.
Worth knowing before you buy: can shatter on a hard corner drop; adds noticeable thickness on curved screens.
Somewhere between £8 and £25 covers almost everyone. Under about £8 you're usually buying glass with no oleophobic coating, which looks fine for a week and then smears permanently.
Above £25 you're paying for a warranty, a better applicator, or a speciality finish like privacy or paper-feel. Those are real benefits, but they're refinements. The jump in protection from nothing to a £10 protector is far larger than the jump from £10 to £30.
Usually, if you buy one described as case-friendly. Those stop fractionally short of the screen edge so a case lip can sit over the top without catching and peeling it.
Full-coverage and edge-to-edge designs look better but can foul thicker cases. If you already own the case, fit the protector first, then check the case clips down flush before you commit to a second one.