
GlasTR EZ FIT
- 2 pack
- 0.33mm
- Fitting frame
iPhone Air owners have one job to get right: buy a protector cut for this exact model, not for the family. The cutouts, the sensor housing and the curve of the glass all change between siblings in the same range, and a protector that is 2mm out will lift at a corner within a fortnight.



Listing states it does not fit iPhone 17, iPhone 17 Pro




![ArmorSuit 3 Pack Screen Protector for iPhone Air [6.6 inch] Case Friendly MilitaryShield HD Clear TPU Film - Made in the USA](https://m.media-amazon.com/images/I/41RLY8qCnEL._SL500_.jpg)

![JDHDL 3 Pack Flexible Film for iPhone Air Screen Protector[NOT GLASS], Non-breakable Soft TPU Hydrogel Film for iPhone 17 Air, Invisible Thin, Scratch Resistant, Self-Healing](https://m.media-amazon.com/images/I/41-Ug3oEDML._SL500_.jpg)

![iCarez HD Anti Glare Matte Screen Protector for iPhone Air 2025 [3 Pack] (Case Friendly) Premium No Bubble Easy to Apply with Hinge Installation](https://m.media-amazon.com/images/I/41U9euV0YTL._SL500_.jpg)


Out of stock at last check



![Lanhiem Magnetic for iPhone Air Phone Case, IP68 Waterproof Dustproof Phone Case, [Compatible with Magsafe] [Built-in Screen Protector] Full Body Heavy Duty Rugged Phone Cover 17 Air 6.5 inch, Black](https://m.media-amazon.com/images/I/4168cc3JkjL._SL500_.jpg)
Pulled from each listing and lined up on the points that decide it. "Not stated" means the seller does not say, which is not the same as no.
| Specification | SpigenGlasTR EZ FIT | ZAGG InvisibleShieldtempered glass | NEW'CInstallation Tool Included | Mkeketempered glass | SIBEITUtempered glass | SMARTDEVILtempered glass |
|---|---|---|---|---|---|---|
| In the pack | 2 | 1 | 3 | 3 | 3 | 2 |
| Thickness | 0.33mm | Not stated | 0.33mm | Not stated | 0.33mm | Not stated |
| Fitting frame | Included | Not stated | Not stated | Included | Not stated | Not stated |
| Oleophobic coating | Stated | Not stated | Stated | Stated | Stated | Not stated |
| View | View | View | View | View | View |
For the iPhone Air the sensible shortlist is tempered glass and tpu / hydrogel film. Below are the options currently sold into the UK, grouped so you can see the difference between a £6 three-pack and a £30 single protector before you commit.
At 5.64 mm the Air is the thinnest iPhone Apple has made, and the frame leaves very little flat border around the 6.5in panel. Case-friendly protectors that stop short of the edge look noticeably inset on this phone — check the coverage claim before buying.
The cutout must clear the sensor housing. A protector that overlaps it can slow or break face unlock, so avoid trimmed-down universal sheets.
Look for a protector with a clean, correctly-sized cutout. Cheap ones leave a visible adhesive ring around the island that catches the light.
Prioritise a good oleophobic coating. Budget glass often skips it, and the surface turns smeary within weeks.
The iPhone Air has a 6.5-inch display. That figure is the diagonal measurement, so it doesn't on its own tell you a protector will fit, two devices with the same diagonal can have different corner radii and cutouts. Always buy one listed for the iPhone Air by name.
Tempered glass is the default choice for the iPhone Air. The default choice. Rigid, glass-clear, absorbs impact by sacrificing itself.
Worth knowing before you buy: can shatter on a hard corner drop; adds noticeable thickness on curved screens.
Somewhere between £8 and £25 covers almost everyone. Under about £8 you're usually buying glass with no oleophobic coating, which looks fine for a week and then smears permanently.
Above £25 you're paying for a warranty, a better applicator, or a speciality finish like privacy or paper-feel. Those are real benefits, but they're refinements. The jump in protection from nothing to a £10 protector is far larger than the jump from £10 to £30.
Usually, if you buy one described as case-friendly. Those stop fractionally short of the screen edge so a case lip can sit over the top without catching and peeling it.
Full-coverage and edge-to-edge designs look better but can foul thicker cases. If you already own the case, fit the protector first, then check the case clips down flush before you commit to a second one.