
InvisibleShield Glass Elite
- Single
- Fitting frame
Out of stock at last check
Google Pixel 8 Pro owners have one job to get right: buy a protector cut for this exact model, not for the family. The cutouts, the sensor housing and the curve of the glass all change between siblings in the same range, and a protector that is 2mm out will lift at a corner within a fortnight.

Out of stock at last check
![Spigen Tough Armor Designed for Pixel 8 Pro Case (2023) [Kickstand] [Military-Grade Protection] - Black](https://m.media-amazon.com/images/I/41yWlAvM7sL._SL500_.jpg)



Out of stock at last check
![AACL 3-Pack for Google Pixel 8 Pro Screen Protector Tempered Glass [6.7"]](https://m.media-amazon.com/images/I/51SSolraHQL._SL500_.jpg)
Listing states it does not fit GOOGLE PIXEL 8 MODEL



Listing states it does not fit Google Pixel 8



![JEHOO [2 Pack] Anti Glare Matte Privacy TPU Screen Protector for Google Pixel 8 Pro (Not Glass), Fingerprint Sensor Compatible, Full Adhesive Flexible Film, Easy Installation](https://m.media-amazon.com/images/I/41KNkPr4BhL._SL500_.jpg)
Out of stock at last check





Listing states it does not fit 2 adjustable
Pulled from each listing and lined up on the points that decide it. "Not stated" means the seller does not say, which is not the same as no.
| Specification | ZAGG InvisibleShieldInvisibleShield Glass Elite | SpigenTough Armor Designed for Pixel 8 Pro Case (2023) [Kickstand] [Military-Grade Protection] - Black | LKtempered glass | OMOTONtempered glass | SMARTDEVILtempered glass | AACLtempered glass |
|---|---|---|---|---|---|---|
| In the pack | 1 | 1 | 4 | 3 | 3 | 3 |
| Lens protectors | Not stated | Not stated | Included | Included | Included | Included |
| View | View | View | View | View | View |
For the Google Pixel 8 Pro the sensible shortlist is tempered glass and privacy. Below are the options currently sold into the UK, grouped so you can see the difference between a £6 three-pack and a £30 single protector before you commit.
Check the listing explicitly states fingerprint compatibility. Thick or heavily tinted glass, and most UV-adhesive kits — can stop an ultrasonic sensor reading properly. You may need to re-register your fingerprint after fitting.
Heavily tinted or privacy protectors make an always-on display hard to read at a glance. Consider a clear protector instead.
The Google Pixel 8 Pro has a 6.7-inch display. That figure is the diagonal measurement, so it doesn't on its own tell you a protector will fit, two devices with the same diagonal can have different corner radii and cutouts. Always buy one listed for the Google Pixel 8 Pro by name.
Tempered glass is the default choice for the Google Pixel 8 Pro. The default choice. Rigid, glass-clear, absorbs impact by sacrificing itself.
Worth knowing before you buy: can shatter on a hard corner drop; adds noticeable thickness on curved screens.
It can, and this is the most common complaint in this category. The Google Pixel 8 Pro reads your fingerprint through the display, so anything thick, heavily tinted, or bonded with liquid adhesive can weaken the signal.
Two practical steps: buy a protector whose listing explicitly states fingerprint-sensor compatibility, and re-register your fingerprints after fitting not relying on the ones enrolled against the bare screen. That second step alone fixes most cases.
Somewhere between £8 and £25 covers almost everyone. Under about £8 you're usually buying glass with no oleophobic coating, which looks fine for a week and then smears permanently.
Above £25 you're paying for a warranty, a better applicator, or a speciality finish like privacy or paper-feel. Those are real benefits, but they're refinements. The jump in protection from nothing to a £10 protector is far larger than the jump from £10 to £30.
Usually, if you buy one described as case-friendly. Those stop fractionally short of the screen edge so a case lip can sit over the top without catching and peeling it.
Full-coverage and edge-to-edge designs look better but can foul thicker cases. If you already own the case, fit the protector first, then check the case clips down flush before you commit to a second one.
Google · 6.3"
Shop protectors →Google · 6.8"
Shop protectors →Google · 6.3"
Shop protectors →Google · 6.3"
Shop protectors →Google · 6.3"
Shop protectors →Google · 6.8"
Shop protectors →