Honor Magic 7 Pro Screen Protectors

The Honor Magic 7 Pro has a 6.8-inch display. That figure is the diagonal measurement, so it doesn't on its own tell you a protector will fit, two devices with the same diagonal can have different corner radii and cutouts. Always buy one listed for the Honor Magic 7 Pro by name.

UV / liquid-adhesive glass is the default choice for the Honor Magic 7 Pro. Glass bonded edge-to-edge with a UV-cured adhesive, for heavily curved screens.

Worth knowing before you buy: fiddly, irreversible installation; adhesive can interfere with ultrasonic fingerprint readers.

It can, and this is the most common complaint in this category. The Honor Magic 7 Pro reads your fingerprint through the display, so anything thick, heavily tinted, or bonded with liquid adhesive can weaken the signal.

Two practical steps: buy a protector whose listing explicitly states fingerprint-sensor compatibility, and re-register your fingerprints after fitting not relying on the ones enrolled against the bare screen. That second step alone fixes most cases.

Because the Honor Magic 7 Pro has a curved display and flat tempered glass physically can't sit down onto a curve. The adhesive holds in the middle and the edges bridge, so a corner knock pops it loose.

You've three workable options: a case-friendly protector that deliberately stops short of the curve, a hydrogel film that wraps it, or a UV liquid-adhesive kit that bonds the whole surface. The UV route gives the best result and is also the hardest to fit.

Somewhere between £8 and £25 covers almost everyone. Under about £8 you're usually buying glass with no oleophobic coating, which looks fine for a week and then smears permanently.

Above £25 you're paying for a warranty, a better applicator, or a speciality finish like privacy or paper-feel. Those are real benefits, but they're refinements. The jump in protection from nothing to a £10 protector is far larger than the jump from £10 to £30.

Usually, if you buy one described as case-friendly. Those stop fractionally short of the screen edge so a case lip can sit over the top without catching and peeling it.

Full-coverage and edge-to-edge designs look better but can foul thicker cases. If you already own the case, fit the protector first, then check the case clips down flush before you commit to a second one.